Roundhouse (# 23-240)
-A modern, finished-type fan-shaped roundhouse with a prototype made of reinforced concrete.
-Has 3 lines and can be added side by side with 3, 6 and 9 lines.
-A linear design with no front door.
-The depth is 200 mm, and large steam locomotives such as C62 and D51 can be stored with plenty of room.
-The roof has a loose, one-sided shape with smoke vent chimneys in front of and behind each track. Light windows are placed on the sides and back.
-A unitrack track (186 mm) that reproduces the inspection and repair pit is attached to the inside of the refrigerator.
-Connect to the outside of the turntable expansion line set (straight line) when using the floor.
・ The angle of the adjacent line is 10 °, and the height of the rail surface is about 12mm. It can also be used by dropping the turntable from the base surface.
-The height of the rail surface when the spacer at the bottom is not used is 7.2 mm.
-Comes with a special sticker with a number display, zebra mark, various slogans, etc.
-A modern, finished-type fan-shaped roundhouse with a prototype made of reinforced concrete.
-Has 3 lines and can be added side by side with 3, 6 and 9 lines.
-A linear design with no front door.
-The depth is 200 mm, and large steam locomotives such as C62 and D51 can be stored with plenty of room.
-The roof has a loose, one-sided shape with smoke vent chimneys in front of and behind each track. Light windows are placed on the sides and back.
-A unitrack track (186 mm) that reproduces the inspection and repair pit is attached to the inside of the refrigerator.
-Connect to the outside of the turntable expansion line set (straight line) when using the floor.
・ The angle of the adjacent line is 10 °, and the height of the rail surface is about 12mm. It can also be used by dropping the turntable from the base surface.
-The height of the rail surface when the spacer at the bottom is not used is 7.2 mm.
-Comes with a special sticker with a number display, zebra mark, various slogans, etc.