Tomix 1784 Wide PC Approach Track CR(L)391-22.5-WP(F) (2 pairs of 4) N Scale
A wide curved cant introduction rail with a radius of 391 mm, a curve angle of 22.5°, and a width of 37 mm. A cant rail where the outer rail of the curve is higher than the inner rail, and the cant rail is introduced into the cant rail by gradually adding cant to the cant rail.
part number
1784
feature
-Painted ballast and sleepers for a beautiful appearance
● PC sleeper expression
●Rails are snapped together with claws for a simple and reliable connection
●Compatible with existing TOMIX rails
- Separately sold handrails, side walls, and fences can be attached to the side of the rail.
-Attach the separately sold single-line pier base to the bottom to support single-line piers
- Can be used as a double track rail by connecting the separately sold CR (L) 354-22.5-WP inside
-When used as a double-track rail, a wide rail cant coupling (wide rail/slab rail coupling for flat introduction) is attached to the bottom to support double-track viaduct legs.
Power supply by attaching a feeder for wide rails and slab rails on the bottom (Feeders for slab rails can also be attached, conventional feeders cannot be attached)
- Wide rail / slab rail sensor can be installed by user modification (slab rail sensor and one-touch mounting sensor cannot be installed)
- Corresponds to various overhead wire pole installation
●The cant inclination angle gradually changes from 0 degrees to about 4 degrees with a curve angle of 22.5 degrees.
● A set of two each of the CR that gradually slopes cant while curving to the right and the CL that gradually slopes cant while curving to the left.
*Product number <1754> will be discontinued.
Product content
- Wide PC approach rail CR391-22.5-WP (F)
- Wide PC approach rail CL391-22.5-WP (F)
- Runner parts: wide rail joint
A wide curved cant introduction rail with a radius of 391 mm, a curve angle of 22.5°, and a width of 37 mm. A cant rail where the outer rail of the curve is higher than the inner rail, and the cant rail is introduced into the cant rail by gradually adding cant to the cant rail.
part number
1784
feature
-Painted ballast and sleepers for a beautiful appearance
● PC sleeper expression
●Rails are snapped together with claws for a simple and reliable connection
●Compatible with existing TOMIX rails
- Separately sold handrails, side walls, and fences can be attached to the side of the rail.
-Attach the separately sold single-line pier base to the bottom to support single-line piers
- Can be used as a double track rail by connecting the separately sold CR (L) 354-22.5-WP inside
-When used as a double-track rail, a wide rail cant coupling (wide rail/slab rail coupling for flat introduction) is attached to the bottom to support double-track viaduct legs.
Power supply by attaching a feeder for wide rails and slab rails on the bottom (Feeders for slab rails can also be attached, conventional feeders cannot be attached)
- Wide rail / slab rail sensor can be installed by user modification (slab rail sensor and one-touch mounting sensor cannot be installed)
- Corresponds to various overhead wire pole installation
●The cant inclination angle gradually changes from 0 degrees to about 4 degrees with a curve angle of 22.5 degrees.
● A set of two each of the CR that gradually slopes cant while curving to the right and the CL that gradually slopes cant while curving to the left.
*Product number <1754> will be discontinued.
Product content
- Wide PC approach rail CR391-22.5-WP (F)
- Wide PC approach rail CL391-22.5-WP (F)
- Runner parts: wide rail joint